CWDM SFP+ 10G optical module is a low-cost WDM transmission technology for the access layer of metro network.CWDM SFP+ 10G optical module adopts CWDM technology, which can save optical fiber resources by using external wavelength division multiplexer to multiplex optical signals of different wavelengths together and transmit them through one optical fiber. At the same time, the receiver needs to use WDM to decompose the compound optical signals.CWDM SFP+ 10G module is divided into 18 bands, from 1270nm to 1610nm, with 20nm between each two bands.

Figure1 10G SFP+ CWDM

In principle, CWDM SFP+ 10G optical module uses optical multiplexer to multiplex optical signals of different wavelengths into a single optical fiber for transmission, and at the receiving end of the link, the mixed signals in the optical fiber are decomposed into signals of different wavelengths with the help of optical demultiplexer, which are connected to the corresponding receiving equipment.

10G CWDM SFP+ Features

Built-in CDR circuits in receive and transmit channels

Compliant with SFP+ MSA, 10Gb Ethernet, CPRI, Fibre Channel, SONET/SDH and OTN OTU2e standards

Selectable wavelengths: 1270nm-1610nm (20nm spacing)

Transmission distances of up to 10 to 80 km over single-mode fiber optics

Maximum power consumption less than 2W, supply voltage 3.3V

Built-in DDM digital diagnostics

Selectable operating temperature ranges: Commercial, Extended, Industrial

RoHS compliant

CWDM SFP+ Series Optical Module Classification

1、10G CWDM SFP+ 10KM

2、10G CWDM SFP+ 20KM

3、10G CWDM SFP+ 40KM

4、10G CWDM SFP+ 60KM

5、10G CWDM SFP+ 80KM

Walsun's 10G CWDM SFP+ 10G coarse WDM optical modules are used for 10G Ethernet in data centers, 10G CPRI mobile forwarding, 10G Fibre Channel, SONET/SDH and OTN OTU2e metro optical transport links, and are widely compatible with equipment from Huawei, Huasan, Cisco, Alcatel, Juniper, and Hewlett-Packard.