Troubleshooting and Repair Tips for BOSHIDA DC Power Modules

Troubleshooting and repair tips:

Troubleshooting and Repair Tips for DC Power Module

1. Check the power cord connection: First check if the power cord is properly connected to the power module and the power outlet. Ensure that the plug is firmly in contact and check that the socket is energized.

2. Check the input voltage: Use a voltmeter to measure whether the input voltage is normal. If the input voltage is lower than the rated voltage range of the power module, it may cause a malfunction.

3. Check Power Switch and Indicator Light: Check that the switch on the power module is on and the indicator light is on. If it is not illuminated, the switch may be faulty or there may be other internal faults in the power module.

4. Check the output voltage: Use a voltmeter to measure whether the output voltage of the power module is normal. If the output voltage is abnormally low or zero, the output circuit of the power module may be faulty.

5. check the protection circuit: some power modules have overcurrent protection or overheating protection. If the power supply modules are overloaded or overheated, they may shut down automatically. Wait for the power supply module to cool down and return to normal before discovering the fault.

6. Replace the power module: If the above steps do not resolve the fault, the power module may need to be replaced. Make sure to select a new module that matches the original and that it is properly installed and connected.

DC Power Module Troubleshooting and Repair Tips

Please note that the power supply should be disconnected before performing any repair or overhaul work to avoid electric shock and other safety risks. If you are unsure how to perform repair work, please consult a professional for assistance.

Additional Learning Hub Resources 

What is the difference between EML and DML lasers? How to choose？ 

100G QSFP28 CLR4 Optical Module Overview 

What is optical module digital diagnostic monitoring (DDM) function?