PRODUCTS
- The power consumption of a QSFP (Quad Small Form-Factor Pluggable) 100G transceiver can vary depending on the specific type and design of the module. QSFP 100G transceivers are available in different categories, such as QSFP28, which is commonly used for 100 Gigabit Ethernet applications.The typical power consumption for a QSFP28 100G module is in the range of 3.5 to 4.5 watts. However, it's e396
- The latency of 10Gb SFP+ (Small Form-Factor Pluggable) transceivers can vary based on factors such as the specific module type, the networking equipment, and the overall network configuration. However, in general, 10Gb SFP+ transceivers are designed to provide low-latency performance suitable for high-speed data communication applications. 10G SFP+The latency of SFP+ transceivers typically in507
- QSFP28 stands for Quad Small Form-Factor Pluggable 28. It is a compact, high-density, hot-pluggable transceiver module used in data communication and telecommunication applications. The "Quad" in QSFP refers to its four-channel design, meaning that it supports four separate data channels. The "SFP" stands for Small Form-Factor Pluggable, indicating that it is a type of optical359
- QSFP (Quad Small Form-Factor Pluggable) and CFP (C Form-Factor Pluggable) are both types of optical transceiver modules used in high-speed data communication applications, but they differ in terms of form factor, data rates, and applications. Here are the key differences between QSFP and CFP: Form Factor:QSFP: QSFP is a smaller form factor compared to CFP. It is designed to be more compact wh416
- FR1 and FR4 refer to different types of substrate materials used in printed circuit boards (PCBs). Here are the key differences between FR1 and FR4 PCBs:Composition:FR1 (Flame Retardant 1): FR1 is typically composed of paper reinforced with phenolic resin. The paper provides the substrate, and phenolic resin acts as a binding material. It is a relatively inexpensive material.FR4 (Flame Retardant 4509